Products
Factory For Serial Digital Interface (Sdi) Ics - MAX3232EIDBR SSOP-16 Electronic components integrated circuit transceiver 3V-5.5V – FlyBird
Factory For Serial Digital Interface (Sdi) Ics - MAX3232EIDBR SSOP-16 Electronic components integrated circuit transceiver 3V-5.5V – FlyBird Detail:
Features for the MAX3232E
●ESD protection for RS-232 bus pins
○±15 kV (HBM)
○±8 kV (IEC61000-4-2, Contact discharge)
○±15 kV (IEC61000-4-2, Air-gap discharge)
●Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards
●Operates with 3-V to 5.5-V VCC supply
●Operates up to 250 kbit/s
●Two drivers and two receivers
●Low supply current: 300 µA (typical)
●External capacitors: 4 × 0.1 µF
●Accepts 5-V logic input with 3.3-V supply
●Pin compatible to alternative high-speed devices (1 Mbit/s)
○SN65C3232E (–40°C to +85°C)
○SN75C3232E (0°C to 70°C)
Description for the MAX3232E
The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND).
The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
Product detail pictures:
Related Product Guide:
Every single member from our large efficiency profits team values customers' requirements and organization communication for Factory For Serial Digital Interface (Sdi) Ics - MAX3232EIDBR SSOP-16 Electronic components integrated circuit transceiver 3V-5.5V – FlyBird , The product will supply to all over the world, such as: Uzbekistan, Sheffield, Nairobi, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
1. Who are the staff in your R & D department? What are your qualifications?
-R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.
R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields
R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys
2. What is your product research and development idea?
- Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market
By Raymond from Malaysia - 2017.05.02 11:33
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Phoenix from Czech - 2018.06.30 17:29
