Globalization concept

Products

Renewable Design for Isolated Can Transceivers - PCM1690DCAR – FlyBird

Short Description:


Product Detail

Research

Product Tags

Related Video

Feedback (2)

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future alongside one another with your esteemed enterprise for Igbt Driver Ic , Ic Electronic Parts , LM386-4 , We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.
Renewable Design for Isolated Can Transceivers - PCM1690DCAR – FlyBird Detail:

Features for the PCM1690

24-Bit Delta-Sigma DAC

8-Channel DAC:High Performance: Differential, fS = 48 kHz

THD+N: –94 dB

SNR: 113 dB

Dynamic Range: 113 dB

Sampling Rate: 8 kHz to 192 kHz

System Clock: 128 fS, 192 fS, 256 fS, 384 fS,512 fS, 768 fS, 1152 fS

Differential Voltage Output: 8 VPP

Analog Lowpass Filter Included 4x/8x Oversampling Digital Filter:Zero Flag

Passband Ripple: ±0.0018 dB

Stop Band Attenuation: –75 dB

Flexible Audio Interface:I/F Format: I2S™, Left-/Right-Justified, DSP,TDM

Data Length: 16, 20, 24, 32 Bits

Flexible Mode Control:3-Wire SPI, 2-Wire I2C-Compatible Serial Control Interface, or Hardware Control

Multiple Functions Through SPI or I2C I/F:Audio I/F Format Select: I2S, Left-Justified,Right-Justified, DSP, TDM Digital Attenuation and Soft Mute

Digital De-Emphasis: 32 kHz, 44.1 kHz,

48 kHz

Data Polarity Control

Power Down

Multiple Functions Through H/W Control:

Audio I/F Format Select: I2S, TDM

Digital De-Emphasis Filter: 44.1 kHz

Analog Mute by Clock Halt Detection

External RESET Pin

Power Supplies:5 V for Analog and 3.3 V for Digital

Package: HTSSOP-48

Operating Temperature Range:–40°C to +85°C

Description for the PCM1690

The PCM1690 device is a high-performance, single-chip, 24-bit, eight-channel, audio digital-to-analog converter (DAC) with differential outputs. The eight-channel, 24-bit DAC employs an enhanced, multi-level delta-sigma (ΔΣ) modulator and supports 8-kHz to 192-kHz sampling rates and a 16-/20-/24-/32-bit width digital audio input word on the audio interface. The audio interface of the PCM1690 supports the time-division-multiplexed (TDM) format in addition to the standard I2S, left-justified, right-justified, and DSP formats.

The PCM1690 can be controlled through a three-wire, SPI-compatible interface, or two-wire, I2C-compatible serial interface in software, which provides access to all functions including digital attenuation, soft mute, de-emphasis, and so forth. Also, hardware control mode provides a subset of user-programmable functions through two control pins. The PCM1690 is available in a 12-mm × 8-mm (12-mm × 6-mm body) HTSSOP-48 package.

For all available packages, see the orderable addendum at the end of the data sheet.


Product detail pictures:

Renewable Design for Isolated Can Transceivers - PCM1690DCAR – FlyBird detail pictures


Related Product Guide:

Our commission is to serve our users and clients with best quality and competitive portable digital products for Renewable Design for Isolated Can Transceivers - PCM1690DCAR – FlyBird , The product will supply to all over the world, such as: Ukraine, Angola, Oman, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we've gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

1. Who are the staff in your R & D department? What are your qualifications?

-R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.

R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields

R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys

 

2. What is your product research and development idea?

- Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market

  • In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Bernice from Bulgaria - 2017.11.11 11:41
    Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Dominic from Cancun - 2018.06.30 17:29
    Write your message here and send it to us

    Our advantages lie in the following trade lanes: