Globalization concept

Products

TPS65910A3A1RSLR Integrated Power Management IC (PMIC) w/ 4 DC/DCs 8 LDOs and RTC in 6x6mm QFN family

Short Description:

TPS65910A3A1RSLR  Integrated Power Management IC (PMIC) w/ 4 DC/DCs, 8 LDOs and RTC in 6x6mm QFN family


Product Detail

Research

Product Tags

Features for the TPS65910

Embedded Power Controller
Two Efficient Step-Down DC-DC Converters for Processor Cores
One Efficient Step-Down DC-DC Converter for I/O Power
One Efficient Step-Up 5-V DC-DC Converter
SmartReflex Compliant Dynamic Voltage Management for Processor Cores
8 LDO Voltage Regulators and One Real-Time Clock (RTC) LDO (Internal Purpose)
One High-Speed I2C Interface for General-Purpose Control Commands (CTL-I2C)
One High-Speed I2C Interface for SmartReflex Class 3 Control and Command (SR-I2C)
Two Enable Signals Multiplexed with SR-I2C, Configurable to Control any Supply State and Processor Cores Supply Voltage
Thermal Shutdown Protection and Hot-Die Detection
An RTC Resource With:One Configurable GPIO

  • Oscillator for 32.768-kHz Crystal or 32-kHz Built-in RC Oscillator
  • Date, Time, and Calendar
  • Alarm Capability

DC-DC Switching Synchronization Through Internal or External 3-MHz Clock

Description for the TPS65910

The TPS65910 device is an integrated power-management IC available in 48-QFN package and dedicated to applications powered by one Li-Ion or Li-Ion polymer battery cell or 3-series Ni-MH cells, or by a 5-V input; it requires multiple power rails. The device provides three step-down converters, one step-up converter, and eight LDOs and is designed to support the specific power requirements of OMAP-based applications.

Two of the step-down converters provide power for dual processor cores and are controllable by a dedicated class-3 SmartReflex interface for optimum power savings. The third converter provides power for the I/Os and memory in the system.

The device includes eight general-purpose LDOs providing a wide range of voltage and current capabilities. The LDOs are fully controllable by the I2C interface. The use of the LDOs is flexible; they are intended to be used as follows: Two LDOs are designated to power the PLL and video DAC supply rails on the OMAP-based processors, four general-purpose auxiliary LDOs are available to provide power to other devices in the system, and two LDOs are provided to power DDR memory supplies in applications requiring these memories.

In addition to the power resources, the device contains an embedded power controller (EPC) to manage the power sequencing requirements of the OMAP systems and an RTC.


  • Previous:
  • Next:

  • 1. Who are the staff in your R & D department? What are your qualifications?

    -R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.

    R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields

    R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys

     

    2. What is your product research and development idea?

    - Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market

    Write your message here and send it to us

    Our advantages lie in the following trade lanes: